Bolt size MM of Clutch on 98 TRX 450S

[tgibbs1969]

I am changing out the clutch on a 1998 Honda trx 450S. I have to remove the Cyn. Clutch first to get to Change Clutch. What MM is the Bolt on the Cyn. Clutch? I don't have a big enought socket for it and need to by it.

Thank you ...

[Here 2 help]

I don't know what size socket I used on the nut, but I used an inch measurement socket. You are supposed to discard the nut after it is removed because it is "staked" on the shaft. It has a thin collar and it is punched into a recess or key slot after tightening. More importantly you will need the clutch puller part #07933-HB3000A $145.00 at your local Honda shop.

[tgibbs1969]

I knew about how to remove the skated bolt...i have a manual......just dont have a metric socket that big.....and wondered the size......
And i heard several talk of aftermark pullers for 35-45 bucks that work great...

Thanks ....Tim