Honda TRX ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Engine/EFI/Drivetrain
    So my 400ex seems like the clutch needs to be adjusted waaaay too far out. I have a new clutch, clutch arm, and clutch springs what could cause the need for this much clutch pull. Thanks in advance
  2. Maintenance / Important Information
    I have a 2000 Honda 400 ex. The clutch will not move/engage when the clutch is pulled. I'm not sure if I need a new clutch wire or if there is something with the clutch itself? I'm new to ATV maintenance and this will be my first big diagnosis. I'm looking for suggestions to diagnosis the...
  3. Engine/EFI/Drivetrain
    So, I was riding my 400ex one day and I noticed that my clutch was dragging pretty bad. when I would pull my clutch in and take of again you would have to rev it up a bit to make it move. So I let it cool of a bit and went to start it and the motor is froze. I have some what of an idea what it...
  4. Engine/EFI/Drivetrain
    My 400ex would not shift properly and fall out of gear while riding. Took the clutch cover off and the piece in my picture was no longer touching the star piece. I need to know how it and the spring go back. Also should the star shaped piece be in a certain position when I connect the loose piece.
  5. Engine/EFI/Drivetrain
    I upgraded a trx400ex engine to the highest possible power output without a 460 kit. A complete Wiseco bottom end, 440 13:1 Wiseco top end, Advanced aluminum sleeve, ported polished head, Kibblewhite valve set with +1mm springs, stage 3 Hotcams cam, trx450r carb, 105 octane fuel, a CDI with the...
  6. Engine/EFI/Drivetrain
    I was recently given a recon from a friend who thought the rear end was bad. Well it ended up being the centrifugal clutch was bad so I replaced it along with the one way bearing and primary clutch packs. I adjusted the primary like it shows in the manual but when shifted into gear it acts like...
  7. TRX General Discussions
    I’ll start with the facts and then add what I believe to be the problem. Quad was running perfect yesterday. Went to start it today, won’t start. Assumed it was a hard cold start, hooked the battery to a tender for while. Still won’t start. Rolled it around the yard in neutral to bring it...
1-7 of 7 Results