Honda TRX ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 29 Results
  1. Maintenance / Important Information
    Hey guys, After doing a ton of work to the quad I'm having issues keeping it running. I tore the quad down and replaced the piston. After assembling the quad it wouldn't start. I checked the intake valves found them to be tight, I then Replaced both intake valves and shimmed them to .006 ...
  2. TRX General Discussions
    I am looking to put trx450r plastics on a trx400ex it’s a 2007 I also have a 2012 400x which would work better for 450 plastics or will they even mount up or what has to be done so they will Mount
  3. Body/Controls/Protection
    I am looking to put trx450r plastics on a trx400ex it’s a 2007 I also have a 2012 400x which would work better for 450 plastics or will they even mount up or what has to be done so they will Mount
  4. Maintenance / Important Information
    My key was misplaced and I had to move it so I hot-wired a switch and it ran great. I took a few laps and parked it for a few moments. I went back to load it and I had no power. I also replaced the battery and it has power from that but no where else. I have since replaced the ignition key...
  5. Maintenance / Important Information
    I got a Honda 420 2014 a year ago and the swingarm has grease fittings? I'm unsure if this is stock as it looks really well done. Not sure if I should be packing grease into them as my 520 or any Honda I ever had never greased the rear end in owning them. Any thoughts?
  6. New Member Introductions
    I don’t know what i gotten into but i wanna track the build.
  7. Engine/EFI/Drivetrain
    Hey guys, new to the forum thing. I’m a automotive/heavy duty mechanic and really only work on 2 strokes, but I’ve got a 2000 Honda trx 250 and I bought it not running. And after running a Compression test I opened up the top end and found the piston to be slightly melted so I replaced the...
  8. Engine/EFI/Drivetrain
    Are the one way bearings on a 1987 fourtrax 250 the same on both sides? I understand that they go in opposite directions but I figured like my other quad that it was just flipped around. So I’m basically asking if I buy the same bearing for both sides would it be correct?
  9. TRX General Discussions
    Hey guys i have an 06 450er that is my baby. Have some minor mods done to it. Mega bomb header & exhaust, k&n filter and filter box cover, programmable cdi box, and a couple other things. I have owned it for 3 years and never had a problem. Went riding the other day with a couple of dirt bikes...
  10. Engine/EFI/Drivetrain
    rebuilt the top end on my 2007 honda trx400ex recently because it was blowing a little smoke and now it wont idle at all I turned the idle adjustment screw all the way in and it still will not idle it will idle if the it is choked but not when the choke is off.
  11. Engine/EFI/Drivetrain
    I searched and searched but couldn’t find exactly what I was looking for so figured I would join the group and try to see if anyone could help! It had been sitting for ever so I pulled the carburetor and tank and cleaned both and jets of course, replaced in tank fuel filter and then reassembled...
  12. TRX General Discussions
    I am new to this forum so forgive me if i overlooked the electrical section this quad has no lights. I have a 2015 TRX90X i am working on for my friend and it turns out to have electrical issues. When Killswitch is set to OFF in either direction and the Starter button is pressed the neutral...
  13. New Member Introductions
    New Member : Hi I just purchased a 2006 TRX 90 and need a wiring diagram. Anyone have one they can send me. Thanks
  14. TRX General Discussions
    Hello guys, new to the forums. I recently bought a used 1999 trx 400ex for a cheaper price thinking not much money was going to go into it. I already spent couple hundred dollars fixing top end because previous owners stripped spark plug whole. On my first ride i broke my rear axle. These guys...
  15. TRX General Discussions
    Wanting to Know what the best Cam Shaft for my set up, I have something a bit different then most guys in here I have a 2003 Honda 300EX Engine That i installed into a Baja Dune 150 Go Kart/Buggy and I was wondering since I have the Engine modded the Things weighs about 550ish it's pretty effing...
  16. Engine/EFI/Drivetrain
    I have an 05 Trx 400ex i bought off craigslist The only issue are the back breaks (currently bleeding them) and the carb leaking. To the right of the yellow choke, and hose, you can see a small nozzle. There is a tube that is long enough to fit around the nozzle shown here This tube leads...
  17. New Member Introductions
    So I just got my first bike. Which is a 2012 Honda trx 400x and it's really good shape just needs new tires and baffle put in it... I just got it yesterday and rode it today around some Hills and things, and I noticed when I am going up a steep Hill I'm giving it gas and like bogs down like it...
  18. Maintenance / Important Information
    Hello, I am interested in buying a 2006 TRX400ex. The owner told me it needed a new battery and rear fender. He sent me some pictures of it and it is the all black model. The tires looked fairly worn out, the exhaust looked aftermarket or tampered with (possibly he removed the spark...
  19. TRX General Discussions
    hi I'm going to meet a guy soon to possibly trade my trx400ex which is 01 for an 01 xr400. Do you think this would be an even trade? On nada his bike has more value but what's your guys opinions?
1-19 of 29 Results
Top