Honda TRX ATV Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter · #1 ·
Hey everybody, just recently my 06 rancher started flashing a diagnostic code of three blinks, so i called up the Honda shop, well... four honda shops, and they all said "shift angle sensor" well, i changed the part, disconnected the battery post and ran the diagnostic test again and i`m still getting the three blink code. Any ideas? i also unplugged most of the connections under the bike, blew them out with the air compressor, and put some WD-40 in the connections, i also took apart the shifting switch on the bars and blew it out, and put some WD in there. Any help would be much appreciated because were headed to the dunes at the end of this month. Thanks in advance!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top