Honda TRX ATV Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I was trying to install a tether kill switch and now there is no power at all, the neutral light is off when the key is on, I checked all connections they are good, any info would be great
 

·
Registered
Joined
·
718 Posts
Is it in neutral? Check fuses. Welcome to the forums and also check the plug in and double check all wiring.
 

·
Super Moderator
Joined
·
4,413 Posts
You need a normally closed kill switch and wire it in series using either the black or black w/white tracer wire going to the handlebar kill switch.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top