Honda TRX ATV Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
ok I just got this bike and it didnt have a shifter on it got a shifter runs and rides fine but in front of the shifter there is a splined shaft just like the shifter one.... what is it for and where do I need to set ithow many clicks up or down
 

·
Super Moderator
Joined
·
4,642 Posts
The missing part is the reverse shift lever.

Reverse is operated by moving the lever up and down. You are probably missing other parts also because the reverse lever is 2 parts plus a bolt, a cotter pin, a nylon guide and guide holder. There is also a lockout lever on the RH side that is cable operated. It is connected to the parking brake lever. You have to stop, depress the "R" button on the parking brake lever, pull the brake lever to release the lock, then move the reverse lever.

If you are not concerned about reverse, just leave it as is.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top