Honda TRX ATV Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I bought a 2001 250 EX, and about 2 years ago I was having trouble with it starting and staying running, and it was making a clanking sound from the top of the head. So I had it looked at and they said that the valves needed adjusted so I looked in the service manual and it said to set it to .005(or .00013 MM). So I made sure that I was on compression stroke and that I was on TDC(Top Dead Center) and adjusted them. They was very tight and took forever to get adjusted right. When I hooked everything back up and started it, it was still making the same noise. Any sugestions on what I should do. Heres a link to the video of the noise (https://www.youtube.com/watch?v=gDJmnENrGpU)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top