2004 trx 450 top end question

1911 Views 4 Replies 2 Participants Last post by mud99, May 12, 2010

TaylorTRX

Discussion Starter · May 12, 2010

hey guys im new to here, but im looking for good new forum so hopefully i found it.......my question is im putting my top end back together...so far i just have the piston and cylinder on...my question is i have 4 dowell pins and im almost positive there is only two that go in the head so where are the other two from
thank you,
Scott

1 - 5 of 5 Posts

mud99

· #2 · May 12, 2010

2

Welcome to the forums. You have 2 that go on the head and 2 on the cylinder.

See less See more

mud99

· #3 · May 12, 2010

The 2 number 5 and 2 number 30 are the dowel pins. I hope this helps.

TaylorTRX

Discussion Starter · #4 · May 12, 2010

thanks alot i appreciate i forgot to put the two under the cylinder good thing i cought that mistake.....thanks again

mud99

· #5 · May 12, 2010

No problem. Glad we could help

1 - 5 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.