Honda TRX ATV Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
I am replacing my stock bars with protapers and I am trying to figure out what to do with the key switch and dummy lights. Not really concerned with the dummy lights just the key switch, any ideas?
 

·
Super Moderator
Joined
·
4,642 Posts
relocate the switch to any handy flat surface or install a switch to connect the red to black wire to get the starter motor to crank - note: if the neutral light is removed, you will have to pull the clutch in when you want to start the motor - to kill the motor shut off the ignition switch and use the kill switch on the handlebar control - note: you can kill the motor any time with the handlebar switch, but if you don't shut off the ignition switch, the battery will drain
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top