Honda TRX ATV Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 · (Edited)
I just bought an after market rear bearing carrier and I think that the bearings are too far apart. I have a gap between my rotor hub and my carrier. I just measured the gap in the picture. It is measured at 1/8in.

Can some one measure the outside faces of bearings through the carrier? or can some one measure the distance between the inside of the sprocket to the inside of the rotor? Any help would be great!!
 

Attachments

1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top