Honda TRX ATV Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
The connectors for the neutral/reverse lights are messed up and do not clamp on to the switchs... I am looking for a new wire to splice into the harness or connect in directly....If there is anyway around this I am all ears. It is rev limited and spark is lost sometimes because of the connection on the side of the case.... I enjoy the lights but are not a must if there is anyway I can fix this Please let me know
 

·
Super Moderator
Joined
·
4,643 Posts
Disconnecting the reverse switch will disable the reverse limiter (not recommended by me). Most reputable motorcycle shops and some automotive suppliers have the connectors and the tools to crimp the connectors to the wires. You need the nuutral light (if the clutch switch fails) to start the engine.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top