[TrxAnthony]

I have a 86 250R and I wanted to add LED Ridgid pods but I’m fairly new to Honda’s. Any tips or advice is appreciated thanks!

 

[Here 2 help]

LEDS require battery voltage to operate - the TRX250R does not have a charging system - the lights operate on AC voltage directly from the alternator - you will need to install a rectifier to change the AC to DC and use a 6 volt LED

 

[TrxAnthony]

LEDS require battery voltage to operate - the TRX250R does not have a charging system - the lights operate on AC voltage directly from the alternator - you will need to install a rectifier to change the AC to DC and use a 6 volt LED

Would I be able to run a 6” Rigid Lightbar with a Rectifier?

 

[TrxAnthony]

I also purchased a Moose Regulator Rectifier. Is that all I will need?

 

[Here 2 help]

Single phase rectifier?

I hate to correct myself, but I just checked the wiring diagram - low and behold I find the 250R did indeed have lights - the operated 12v AC - there is an AC voltage regulator in the system - all you need is a diode and a 6v LED