Honda TRX ATV Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
My kicker will not stay in place, and always flops into my leg. Im Honda stupid as this is my first one. Ive searched for a rebuild kit, but am not finding anything. Can someone point me in the right direction?
 

·
Super Moderator
Joined
·
4,647 Posts
Threr is supposed to be a ball and spring in the kick start boss. If someone removed the screw in the lever and lifted it off the boss, they may have lost the ball or both the ball and spring. Or, if the parts weren't lubed properly, the lever may have a groove worn in it from the detent "divot". The ball is supposed to seat in the "detent divot" and hold it in place.

Remove the screw in the lever and carefully lift it off the boss checking to see if the ball and spring are present. If the ball and spring is there, inspect the inside of the lever boss bore and see if there is a groove worn in it.

you might just need the ball and spring or a whole new lever assembly.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top