Honda TRX ATV Forum banner
1 - 4 of 4 Posts

·
Super Moderator
Joined
·
4,643 Posts
Sorry, I missed your inquiry about removing the rocker arms. If you removed the pins by heating the head cover and using vice grips, it is best to install new pins.

Are you inquiring about how to set the valve clearance? There is no adjustment for the rocker arms. If that's the case, set the engine a TDC of the compression stroke and use 2 feeler blades (one for each tappet adjuster) to set the intake at .004 and the exhaust at .003 inch.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top