Honda TRX ATV Forum banner
1 - 3 of 3 Posts

·
Super Moderator
Joined
·
4,642 Posts
Just 2 bolts on the LH end and the battery wire - wedge a screwdriver between the engine and the RH end of the starter motor and pry towards the rear - besides the two bolts on the LH end it's just an o-ring sealing it in the hole.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 · (Edited)
Thanks

Thanks for the info. The starter was really wedged in good. After finally getting a small crack on the bolt end of it, I had to take a hammer and screw driver and tap it out. New brushes and it's working fine.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top