Honda TRX ATV Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Error codes indicated angle sensor problem on a 05 Rancher AT (TRX400FA). Trials and investigation indicated same. Replaced angle sensor, preloaded, preset, reset, and did all (I think) the service manual said to do. Seemed to work fine during initial test run but is rapidly digressing to previous state. If you slow to turn or are puttering around and try to throttle up or come upon the need for more throttle the machine does not seem to down shift but tries to continue as if in high gear. Any help would be great thanks
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top