Honda TRX ATV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi I have an 07 trx450er that has rolled end over end and now wont take off. It starts and idles like normal I'll pull the clutch in put it in gear still idling normal then go to let out of the clutch and it kills the motor like an electrical issue or a killswitch but I cant seem to figure it out any advice will help. Thanks
 

·
Super Moderator
Joined
·
3,090 Posts
There is a switch on the clutch lever - it's intended purpose is to allow cranking the engine when in gear - the switch may be damaged or shorted in some way causing the killing of the engine - try disconnecting the switch from the wiring and see if it solves the problem - if not, try shorting the wiring harness connectors together and see if that works - it's not solving the problem, but narrowing down the possibilities.
 
1 - 2 of 2 Posts
Top